5 Martin Place, Sydney

Ashurst Fitout Levels 5-11

Cubic has again showcased its commitment to deliver exceptional quality and workmanship though its works on state-of-the-art commercial building 5 in Martin Place. The project follows on from Cubic's success on the University of New South Wales Materials and Science Engineering Building.

Cubic’s Managing Director Robert Migliorino says the heritage aspect of the 5 Martin Place building did present a challenge. “Working in a heritage structure was very challenging, as not one floor was identical to the other.”

Cubic installed the base building ceilings and partitions, amenities fitout, glazing to the lift shaft and Ashurst fitout.

According to Mr. Migliorino, a particular feature of Cubic’s work on the project was the installation of specialised perforated metal ceiling systems. This required Cubic to install an oval perforated metal pan suspended ceiling. Bespoke partitioning systems were also utilised in the Ashurst fitout.

Cubic worked closely with Grocon, Hassell Architects and base building architects on 5 Martin Place, and had an average of 50 staff working on the project.

“The refurbishment of an iconic Sydney building morphing into the new structure…is spectacular,” he says. “We are very proud of the outcome and congratulate all of the Cubic Staff that contributed to this project.”

Year Complete: 2015

Levels: 7

Area sqm: NA

Type of Work: Integrated Fitout

Client: CFS Managed Property & Cbus Property

Builder: Grocon Constructors (NSW)

Architect: Hassell

  • Sub Contracting
  • Cubic Interiors
  • Workspace, Commercial
  • NSW